DINGTouch has successfully completed a custom cover glass development project integrating chemically strengthened low-iron soda-lime glass, precision black silk-screen printing, 940nm infrared (IR) transmissive ink, and a front-surface anti-fingerprint (AF) coating.
This project was developed to meet demanding mechanical, optical, and cosmetic requirements for an advanced display assembly.
Unlike conventional cover glass, which primarily provides mechanical protection and a decorative black border, this solution required precise control over both visible-light shielding and infrared transmission.
The key engineering challenge was to achieve high visible-light opacity while maintaining excellent infrared transmission through designated printed areas, without compromising the glass strength, edge quality, or surface finish.
Through material selection, chemical strengthening, precision edge processing, controlled screen printing, and surface coating, DINGTouch delivered an integrated cover glass solution designed around the customer's application requirements.

The project specified low-iron soda-lime float glass as the base material.
Low-iron glass helps reduce the greenish tint associated with conventional soda-lime glass, providing improved optical appearance and a cleaner visual presentation.
To enhance mechanical durability, the glass underwent chemical strengthening.
Key mechanical specifications:
Glass material: Low-iron soda-lime float glass
Strengthening process: Chemical strengthening
Depth of Layer (DOL): ≥10 μm
Surface Compressive Stress (CS): ≥450 MPa
Edge treatment: Pencil-edge polishing on all four sides
Maximum edge chip size: 0.3 mm
The chemical strengthening process introduces a compressive stress layer on the glass surface, improving resistance to mechanical damage and helping the cover glass withstand demanding operating conditions.
The combination of controlled strengthening parameters and polished edges is particularly important for display assemblies where mechanical reliability and consistent appearance are both essential.
The black silk-screen printing area was designed to provide effective visible-light blocking and a consistent black appearance.
The customer required different optical performance thresholds for visible light and infrared wavelengths.
Black ink optical requirements:
Visible-light optical density (OD): ≥4
Optical density at 940 nm: ≥3
No pinholes larger than 0.1 mm within the 5 mm region surrounding the viewing window
Printing alignment tolerance relative to the reference datum: ±0.2 mm
High optical density in the visible spectrum helps prevent unwanted light leakage from internal display components and creates a clean black border around the viewing area.
The pinhole requirement is especially important because even small printing defects may become visible under certain lighting conditions or affect the cosmetic quality of the finished assembly.
DINGTouch focused on controlling ink coverage, printing consistency, and alignment accuracy to meet the specified optical and cosmetic requirements.
One of the most technically demanding aspects of this project was the integration of infrared-transmissive ink.
In conventional cover glass designs, black decorative ink is primarily intended to block visible light. However, certain applications also require infrared signals to pass through designated printed areas.
This project specified a dedicated IR-transmissive ink with the following performance:
Operating wavelength: 940 nm
Infrared transmittance: ≥87%
Haze: ≤2%
Measurement basis: Printed sample
This combination allows the printed region to maintain a black appearance under visible light while supporting infrared signal transmission at the specified wavelength.
It is particularly relevant to display assemblies incorporating infrared sensing, optical communication, proximity detection, or other IR-based functions.
The important engineering consideration is that visible-light opacity and infrared transmission must be evaluated separately.
A black ink that performs well in visible-light shielding does not automatically provide the required infrared transmission.
Therefore, the ink formulation, printing thickness, substrate characteristics, and measurement conditions all need to be considered during development and validation.
In addition to optical performance, the project required accurate control over the printing boundary and edge-finishing area.
The printing design incorporated the following requirements:
Printing termination position: 0.5 ±0.3 mm before the beginning of the corner radius
No ink coverage in the edge-grinding area
Printing position tolerance: ±0.2 mm relative to the reference datum
Maximum edge chipping: 0.3 mm
These requirements help prevent ink contamination in the polished edge region and maintain a consistent transition between the printed area and the glass edge.
The relationship between glass geometry, corner radius, edge polishing, and silk-screen positioning must be considered during drawing review and manufacturing.
For precision cover glass, printing accuracy is not simply a matter of appearance. It also affects assembly alignment, optical consistency, and the usable area for integrated sensing functions.
The front surface of the cover glass was specified with an anti-fingerprint (AF) coating.
AF treatment helps reduce fingerprint adhesion and makes the glass surface easier to clean during daily operation.
For industrial and professional equipment, this treatment can help maintain a cleaner display appearance, particularly in applications involving frequent user interaction.
The coating also needs to be considered alongside the glass surface condition, optical requirements, and subsequent cleaning and reliability validation.
This project demonstrates why custom cover glass manufacturing requires more than selecting a suitable glass material.
Multiple processes must work together to achieve the final performance:
Low-iron soda-lime glass material selection.
Chemical strengthening to achieve the specified DOL and CS values.
Four-sided pencil-edge polishing and edge-quality inspection.
Precision black silk-screen printing.
Dedicated 940nm IR-transmissive ink application.
Printing alignment and optical defect inspection.
Front-surface AF coating.
Final dimensional, optical, and cosmetic verification.
Each process can influence the performance of the finished component.
For example, excessive printing variation may affect optical density and IR transmission, while inaccurate edge processing can interfere with printing boundaries and assembly dimensions.
A coordinated manufacturing approach helps reduce these risks and provides better control over the complete cover glass assembly.
DINGTouch provides custom cover glass and integrated industrial touch display solutions for OEM and ODM customers.
Our engineering and manufacturing capabilities support customized requirements including:
Low-iron and conventional soda-lime glass
Chemically strengthened and thermally tempered glass
Custom glass thickness and dimensions
Pencil-edge, C-edge, and precision edge polishing
Black, white, and customized silk-screen printing
High-opacity visible-light shielding ink
940nm infrared-transmissive ink solutions
AF anti-fingerprint, AG anti-glare, and AR anti-reflective treatments
Custom viewing windows, sensor openings, and optical regions
PCAP touch sensor integration
LCD and touch panel full optical bonding
With 15 years of industrial touch display customization experience, DINGTouch supports OEM customers from initial drawing evaluation and material selection through prototype development and production.
Our integrated capabilities in cover glass, capacitive touch panels, LCD integration, and optical bonding help simplify the development process for customized display assemblies.
Are you developing an industrial display, infrared sensing interface, medical device, or specialized optical control panel?
The performance of cover glass can directly affect mechanical protection, optical transmission, touch interaction, and the overall reliability of your equipment.
DINGTouch can evaluate customized glass structures, printing designs, infrared transmission requirements, surface treatments, and touch display integration according to your project specifications.
Contact DINGTouch for your next custom cover glass or industrial touch display project.
Website: https://www.szdingtouch.com
Email: sales@szdingtouch.com
Shenzhen Dingtouch Electronics Technology Co.Ltd.
Your OEM/ODM Partner for Custom Industrial Touch Display Solutions.
Ready to Build Your Outdoor Display Solution?
Get in touch with us at sales@szdingtouch.com. Our expert engineers will help you design a cost-effective, tailored solution to meet your project’s exact specifications.
DINGTouch:Committed to continuous innovation and improvement of product quality to meet customers' high requirements and expectations.
DINGTouch is a manufacturer that provides high quality touch screen panels. Focus on the design, manufacturing and sales of touch screen panels, and are committed to providing customized solutions that satisfy customers.
DINGTouch: In the process of customizing touch screen panels, we focus on close cooperation and communication with customers. Understanding customers' needs and providing customized solutions will meet customers' individual needs. The company's products are favored by customers for their high quality and reliability, and provide them with the best touchscreen panel solutions.
DINGTouch is a company specializing in the R&D and production of touch screen technology, headquartered in Shenzhen, China. As a professional touch screen supplier, DINGTouch is committed to providing high-quality, stable and reliable touch screen products to meet the diverse needs of customers. We continue to carry out technological innovation and product optimization to ensure that its touch screen products have good sensitivity, accuracy and durability.
In addition to the products themselves, we also focus on cooperation and communication with customers, and are committed to providing customized solutions and excellent after-sales services. Through continuous efforts to improve product quality and customer satisfaction, we have established a good reputation in the touchscreen industry and won widespread market recognition.
• PCAP maximum size 65”
• Multi-touch (Touch screen can be customized to your needs.)
• Optical bonding service/air bonding
• LCD interface: HDMI/RGB/MIPI/LVDS/EDP, etc.
• PCAP interface: IIC/USB interface
• CTP can customize the cover glass surface treatment process AG (anti-glare), AR (anti-reflection), AF (anti-fingerprint), waterproof, and glove touch
• Supports 0.55 mm-12 mm coverslip touch.
• Support operating temperature: -40℃-90℃.
In conclusion, Dingtouch as a professional touch screen manufacturer with more than 10 years touch screen experience.We have many capacitive touch screen. Such as 5 inch touch screen,7 inch touch screen,10.1inch touch screen,15 inch touch screen,15.6 inch touch screen,17 inch touch screen,18.5 inch touch screen,19 inch touch screen,21.5 inch touch screen,32 inch touch screen, However, we also welcome to customize your own touch screen . Contact our team today to learn what capacitive touch screen are best for our retail business needs.
Contact us NOW! sales@szdingtouch.com
#Medicaltouchscreencalibration, #capacitivetouchcalibrationguide, #IEC60601touchscreen, #DINGTouchmedicaldisplay, #touchscreenaccuracy, #touchscreen driftfix, #medicalequipmenttouchsolutions, #IP65touchpanel, #IK10medicaltouchscreen, #glove touch medical monitor,#ILITEKTouchControllerICSelectionGuide ,#OCAtoOCR #GT911,#CustomizedWideTemperatureTouchScreenSolutions,#Waterproof Touchscreen,
#highbrightnessLCD, #sunlightreadabledisplay,#industrialLCDbacklight, #outdoor displaymodule, #customLCDsolution, #1000–2000nitsdisplay, #DINGTouchtouchscreen.
DINGTouch — Custom Touch Display Solutions Expert
Every touch, clear and precise, ready for any environment.









What DINGTOUCH can do:
Dingtouch Industrial capacitive touch screen Manufacturer
Contact: Dingtouch
Phone: +8615815536116
Tel: +8615815536116
Email: sales@szdingtouch.com
Add: Building A, Bailu Plaza, No. 48, Gonghe Industrial Road, Gongle Community, Xixiang Street, Baoan District, Shenzhen,China. 518126