News

Four Points To Note About Capacitive Touch Glass Screens

Any item has a service life. In order to better extend its use time, there are some details of use that we must take seriously. The editor of Shenzhen capacitive Capacitive Touch Glass Screens manufacturer has collected the following points for your reference.

Four Points To Note About Capacitive Touch Glass Screens

1.It is forbidden to let water droplets or other soft things stick to the surface of the touch screen. Otherwise, the touch screen will be very easy to make judgment errors. You can believe that the appearance of the sound wave screen is inaccurate due to hand touch. Also, when removing dirt on the surface of the capacitive touch screen. We recommend to use a soft dry cloth or cleaning agent to carefully wipe from the center of the screen outwards. Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the surface of the touch screen.

2.Suppose the capacitive touch screen is operated in the middle. It will change the display resolution or display mode of the touch screen again. Or after adjusting the refresh frequency of the touch screen controller. When you feel that the cursor cannot correspond to the touch point. All must re-calibrate the touch screen system.

3.Suppose you touch the surface acoustic wave touch screen with your hands or other touch objects. The touch screen response will be very sluggish. This proves that it is very likely that the capacitive touch screen system is outdated and the internal clock frequency is too low. Or because water drops are moving on the surface of the touch screen. Therefore, it is necessary to restore the quick response of the touch screen. You need to replace and upgrade the system again. Or use a rag to dry the water droplets on the surface of the touch screen.

4.If the system changes the display resolution, adjusts the screen size and installs for the first time, there will be click inaccuracy or drift. Need to start the positioning program that comes with the application to reposition. But when you are positioning, it is recommended to use a thinner pen or fingertip for positioning, which is more accurate.